Product center
瑞安MLX1T - Single-mode centrifugal grouting machine
Category:
Product Description
Features
This machine adopts a planar circulating working method to complete the slurry casting process of the blank, with:
1. Automatic centrifugal slurry casting function, slurry casting speed (fast and slow speed), slurry casting amount can be accurately adjusted, and the slurry casting head can be individually controlled and adjusted.
2. Intelligent slurry pouring function, slurry pouring time and angle are adjustable, and it has a slurry pouring blowing function.
3. Realize multi-point automatic control, overcurrent/phase failure protection and automatic prompt function, the whole machine performance is reliable.
4. This machine adopts modular design, installation, debugging, operation and maintenance are simple, energy-saving, environmentally friendly, labor-saving, and cost-effective.
5. The slurry suction, slurry control, and blank solidification time are automatically matched and adjusted by the equipment, with great flexibility.
6. The gas-fired hot air furnace air duct is used for spraying and drying the mold, which can quickly remove excess water.
7. Sleep running drying mode, which can safely and effectively dry the online molds when the equipment is not working.
Applicable: Suitable for continuous production of multi-variety and small-batch products.
Technical Parameters
| Serial Number |
Name |
CHN-MLX1T |
| 1 |
Equipment External Dimensions |
23000×3700×4700 |
| 2 |
Molding Method |
Single-mold centrifugal slurry casting machine |
| 3 |
Total Weight |
10T |
| 4 |
Maximum Capacity |
60 pieces/hour |
| 5 |
Number of Molds |
215 |
| 6 |
Maximum Mold Size |
(Square) ≤290*290*H460 |
| 7 |
Power Consumption |
13Kw Power supply: 380V/Ac±10%, three-phase five-wire, 50Hz |
| 8 |
Drying Heat |
Approximately 50,000Kcal/hr |
| 9 |
Heating System | Adjustable from room temperature to 65℃, waste heat from the kiln can be used |
| 10 |
Gas Pressure |
3Kpa～5Kpa (Natural Gas) |
| 11 |
Compressed Air |
0.6～0.8Mpa (Clean Filtered) |
| 12 |
Environmental Requirements |
10%～90% RH【0～40℃】，10%～55% RH【41～50℃】，Pollution Level 2 |
