Product center


瑞安CHN-MLX2T intelligent centrifugal grouting line

This machine uses a planar circulating working method to complete the slurry casting process of the blank.

Product Description

Functions and Features

  This machine adopts a planar circulating working method to complete the slurry casting process of the blank, with:

1. Automatic centrifugal slurry casting function, slurry casting speed (fast and slow speed), slurry casting amount can be precisely adjusted, and the slurry casting head can be individually controlled and adjusted.

2. Intelligent slurry pouring function, slurry pouring time and angle are adjustable, and it has a slurry pouring blowing function.

3. Realize multi-point automatic control, overcurrent/phase failure protection and automatic prompt function, the whole machine performance is reliable.

4. This machine adopts modular design, installation, debugging, operation and maintenance are simple, energy-saving, environmentally friendly, labor-saving, and cost-effective.

5. The slurry suction, slurry control, and blank setting time are automatically matched and adjusted by the equipment, with great flexibility.

6. The gas-fired hot air furnace air duct is used for spraying and drying the mold, which can quickly remove excess water.

7. Sleep running drying mode, which can safely and effectively dry the online molds when the equipment is not working.

Applicable: Suitable for continuous production of multi-variety and small-batch products.

 

Technical Parameters

Serial Number

Name

CHN-MLX2T

1

Equipment External Dimensions

23000×3700×4700

2

Molding Method

Double-mold centrifugal slurry casting machine

3

Overall Weight

10T

4

Maximum Production Capacity

160 pieces/hour

5

Number of Molds

280

6

Maximum Mold Size

(Square) Length and width ≤230, height ≤H320

7

Power Consumption

25Kw Power supply: 380V/Ac±10%, three-phase five-wire, 50Hz

8

Gas Pressure

3Kpa~5Kpa (Natural Gas)

9

Compressed Air

0.6~0.8Mpa (Clean and filtered), consumption 0.2m3/min

10

Environmental Requirements

10%~90% RH【0~40℃】,10%~55% RH【41~50℃】,Pollution level 2