Product center
蒙自CHN-L138 intelligent hollow grouting line
Category:
Product Description
Functions and Features
This machine adopts a vertical circulating working method to complete the slurry molding process of the blank, with:
1. Automatic slurry injection function, the slurry injection speed is divided into fast, slow speed, laser ranging, the injection volume is precisely adjustable, and the injection head can be individually controlled and adjusted.
2. Automatic pipeline cleaning function to ensure pipeline patency and cleanliness.
3. Automatic slurry pouring function, pouring twice, thorough pouring, pouring angle and pouring time are adjustable.
4. Automatic temperature control function, the circulating return air temperature can be set arbitrarily in the range of room temperature ~ 60 ℃.
5. Realize multi-point automatic control, overcurrent/phase failure protection and automatic prompt function.
6. It has functions such as automatic protection alarm for insufficient gas and leakage, and pouring failure protection.
7. Cooperating with the design of the hot air system, reasonably allocating the demolding and mold drying operation time to improve production efficiency.
8. The overall structure adopts a modular design, which facilitates equipment installation and daily maintenance.
Applicable: Suitable for continuous production of batch products.
Technical Parameters
| Serial Number |
Name |
Parameters |
Remarks |
|
| 1 |
Equipment Dimensions |
25600×4800×6000 |
Length × Width × Height (mm) |
|
| 2 |
Total Weight |
45T |
||
| 3 |
Number of Stations |
138 |
Up to 12 molds can be placed at each station |
|
| 4 |
Number of Injection Heads |
12 |
Injection heads can be individually controlled and adjusted |
|
| 5 |
Applicable Molds |
Width or diameter ≤ 200mm, height ≤ 300mm |
||
| 6 |
Maximum Number of Molds |
1656 |
||
| 7 |
Standard Capacity |
600 pieces/hour |
||
| 8 |
Rated Power |
25Kw (Power supply: 380V/Ac ±10%, three-phase five-wire, 50Hz, 40A) |
||
| 9 |
Heating System |
Room temperature ~ 60 ℃, interface parameter setting |
Hot air furnace is individually controlled and can be connected to kiln waste heat |
|
| 10 | Gas | Pressure |
3Kpa~5Kpa |
Natural Gas |
| Usage |
4～6m³/hour |
|||
| 11 |
Compressed Air |
0.6～0.8Mpa |
Cleaning and Filtration |
|
| 12 |
Environmental Requirements |
10%~90%RH【0~40℃】, 10%~55%RH【41~50℃】, pollution level 2 |
||
