Product center
合肥CHN-SX300 intelligent solid grouting line
Category:
Product Description
Functions and Features
This machine adopts a planar circulating working method to complete the slurry casting process of the blank, with:
1. Automatic slurry injection and pressure holding function, pressure holding time is adjustable within a certain range.
2. Automatic slurry discharge function, and with slurry discharge and air blowing function.
3. Automatic mold opening function, manual removal of blanks.
4. Automatic mold stacking and transfer function.
5. Realizes multi-point automatic control, overcurrent/phase failure protection and automatic prompt function, the whole machine performance is reliable.
6. Sleep running drying mode, which can safely and effectively dry the online molds when the equipment is not working.
7. This machine adopts a modular design, divided into single-unit and double-unit machines, installation, debugging, operation and maintenance are simple, energy-saving, environmentally friendly, labor-saving, and cost-reducing.
Applicable: Suitable for mass production of solid slurry casting products such as cup handles.
Technical Parameters
| Serial Number |
Name |
CHN-SX300 |
| 1 |
Equipment External Dimensions |
25400X3400X3300 |
| 2 |
Equipment Name |
Intelligent Solid Slurry Casting Line |
| 3 |
Total Weight |
8T |
| 4 |
Maximum Capacity |
180 molds/hour |
| 5 |
Number of Molds |
124 |
| 6 |
Maximum Mold Size |
Diameter 300 Height 75 |
| 7 |
Power Consumption |
Kw Power Supply: 380V/Ac±10%, three-phase five-wire, 50Hz |
| 8 |
Heating System |
Room temperature~65℃ adjustable, kiln waste heat can be used |
| 9 |
Gas Pressure |
3Kpa~5Kpa (Natural Gas) |
| 10 |
Compressed Air |
0.6~0.8Mpa (Clean Filtered), Consumption 0.2m3/min |
| 11 |
Environmental Requirements |
10%~90% RH【0~40℃】, 10%~55% RH【41~50℃】, Pollution Level 2 |
